(Water tanks)

Flexi tanks are ideal and unique solution for the storage of bulk water.  Our rainwater storage products are fully adapted to both individual and professional users' needs.

These tanks are the alternative when space is lacking or access is difficult.

They can be used for Tempery or Permanent Storage 

The tanks are self supporting with no structure required

Ideal if it is Large or Small Volumes required

For Rain Water Harvesting The Tanks Have top fill access making them ideal when connected to self cleaning weir type down pipe filters

Can be used as booster storage on Lifestock Farms with option of mains top up if needed

All Tanks come with Inlet and out let and over flow connections

Clorinated Drinking Water Spec Available - Complies with EU Directives 2002/72, 97/48, 85/572.

The fabric and Accessories are ACS certified 

The tank allows protection of the water from the air, light and any contamination. The water Remains in tact Safe Drinking

 All Fittings Are food Grade Stainless 

For The fire Protection Range All tanks have all the necessary certification 

Validation is necessary prior to all instillations by Local fire officer

Tanks are ideal in Isolated areas where there is bad mains Pressure or supply

Always constant pressure of water to Fire Services

(Hose Reelers)

Greencrop Farmspread reelers are designed to take the hard work out of hose laying and retrieval. Developed over many years to give long and reliable operation, Greencrop reelers give you the features you need combined with heavy-duty construction, and powerful hydraulic drive.

Both mounted and trailed reelers feature high performance hydraulic drive, with cross line relief protection, and proportional control valves to give maximum efficiency, and long maintenance free service life.

 

Mounted Reeler
Standard Features: 1000m / 800m / 600m hose capacity 200m spools carrying 4” or 5” layflat hose Heavy duty construction Painted Frame with CAT2 Linkage Hydraulic drive operated from tractor cab Rear guide roller to prevent pipe twist Optional A frame mounting

 

Trailed Reeler
Standard Features: 1000 / 1500m hose capacity Heavy duty construction High quality painted finish Hydraulic drive Rear Roller Road Lights Optional steering drawbar Rear tow hitch.

 

(Clean Water PTO Pumps)

 MEC D Surface Pumps

 

Suitable for pumping water in mobile or semi-fixed irrigation systems. Centrifugal pump with horizontal axis, spiral delivery casing, and one or two impellers in series. Reliable and high quality, the 3-point linkage mounted pumps are reliable and give constant performance. The kit comprises the following: Caprari pump model MEC D3/65 B - 540 PTO Galvanised Three point frame PTO shaft Hand priming w/gatevalve Suction and delivery flanges Male ball couplers with adaptors Suction kit diam.- 120 Swan neck outlet pipe with Bauer 4" coupling.

 

(Dirty Water Systems - PTO Pumps)

Dirty Water Systems - PTO Pumps Model 2DR 2" gearbox mounted Automatic self priming Purging & snoring Pto driven Centrifugal pump

Peak Performance, Priming and Application

Performance These units deliver big pump performance. The 2DR will deliver up to 10000 gallons per hour (45 cubic metres per hour).		Priming The 2DR exclusive self priming principle ensures quick, dependable automatic priming down to a maximum of 5m with as little as one third level in pump body.
Application The 2DR model is designed for use where clean or dirty liquids have to be handled and where dependability is essential. Wide usage has been made of this pump for many years in both agriculture and industry.		Heavy Cast Wall Sections Thick, heavy wall sections stand up to any pressures encountered in the field for long service under hard usage on tough jobs.
Special Non Clogging Impeller Solids that clear the strainer are easily handled by non clogging, parallel vane impeller. Improved design gives improved efficiency. Maximum water delivery and complete dependability.		Seals And Gaskets Shaft seals are of the dripless self-lubricating type and, as are all gaskets, made from petroleum resistant materials. Stainless steel shafts and seals are available for agricultural fertilisers.
Automatic Suction Valve Opens full suction width when pump is operating. Maintains tight closure when pump is inoperative, retaining priming water in pump.		Gearbox The gearbox fitted is a heavy duty model, designed for 540 rpm maximum input speed.

Specifications

PTO Driven Positive Displacement Pumps 

In situations were a suitable electric supply is either unavailable, or too costly, AKAM PTO driven scroll and stator pumps provide a practical alternative. Using the market leading MONO pump range allows Greencrop to match pump specification to your needs exactly. AKAM Scroll & Stator Positive Displacement Pumps AKAM Scroll & Stator pumps are ideal for situations requiring higher heads, or greater solids handling capability. The latest pumping technology from MONO pumps ensures maximum performance, and piece of mind. The system is commonly used for effluent disposal, with larger pumps available for heavier duties such as pig slurry, and umbilical applications. AKAM offer a standard range of pumps covering most common applications, for direct PTO drive at up to 540 RPM.

 

Standard Features:

• Complete with suction hose, PTO shaft, and galvanised linkage frame
• Self-priming operation
• Pressure relief valve
• Quick release fitting for suction and delivery hoses
• Supplied through our network of dealers, for full maintenance, and commissioning service.

Tractor Protection Kit
All pumps can be supplied with an optional tractor protection system to allow automatic shut down of the tractor due to high or low pump pressure, and or loss of flow. Tractor shut down kits also protect the tractor against loss of engine oil pressure, or high coolant temperature. 

CBO42 – PTO 5m3/hr @ 9Bar, running at 420 RPM		Supplied with 4m x 2” suction hose with coupling, three point linkage frame, PTO shaft, pressure relief valve, and 2” delivery connection
CBO52 – PTO 12m3/hr @ 9Bar, running at 470 RPM		Supplied with 4m x 3” suction hose with coupling, three point linkage frame, PTO shaft, pressure relief valve, and 3” delivery connection

(Pump in a Box electric)

GC (pump in box) pumping system, single or three phase mono stator rotor horizontal pump c/w manual/auto start stop, frost stat, self priming, suction hose with footvalve and filter, high pressure cut off. 1 x Control panel with starter, float switch control, high-level alarm and beacon, minicap pump protection relay and base, two float switchgear complete with micro-switch and 10m of cable. GC Scroll & Stator pumps are ideal for situations requiring higher heads, or greater solids handling capability. The latest pumping technology from MONO pumps ensures maximum performance, and peace of mind.

 

The system is commonly used for effluent disposal, with larger pumps available for heavier duties such as pig slurry, and umbilical applications.

 2.2KW - 6m3/hr & 2.2KW 8m3/hr

GC offer a standard range of pumps covering most common applications, although belt drive transmissions allow pumps to be specified to meet specific requirements.

3KW - 8m3/hr & 4KW 10m3/hr

Standard pumps are specified to operate up to 9 bar. Greencrop can also offer a range of PTO driven scroll and stator pumps, designed for three point linkage mounting, offering a self priming pump with solids handling capability, particularly suitable for high head.

Pumping Station Package

We include for One Mono C15BC31RPH Pump Unit, linked by a twin v-belt drive to a 5.5 kW three phase motor. The pump is geared to run at a speed of 468 rpm, and in this configuration will develop discharge head of 12 bar, with nominal output of 12m³/hr.(with pumps available up to 16 bar, and outputs up to 120 m³/hr). built to the following specification.

The pump is supplied built into a treated timber pump house, complete with 3” suction kit, comprising galvanised inlet pipework, 6m x 3” suction hose and the necessary couplings.

The package also includes a 2” delivery kit, including pressure relief valve, outlet shut off valve and non return valve with pressure gauge and tapping for pressure swichgauge.

The pump control panel is complete with full manual and automatic control and full overload protection. The control panel also includes 240v to 24v transformer to provide 24 volt operation of pump controls and protection devices. The control circuits are built into a fully enclosed waterproof housing. The panel also includes full MCB protection and door mounted isolator.

We also include a high/low pressure monitoring system. High pressure shut down enables shut down of the pump when either the mobile irrigator reaches the end of its run, or a jet blockage in the sprinkler causes a pressure build up. Low pressure shut down is fitted with a timer delay unit and enables shut down of the pumping station due to a loss of pressure caused by either a burst on the output line or loss of suction.

Shut down due to either low or high pressure isolates the pump and triggers either a warning beacon or siren. The system can only be reset manually and so prevents the system restarting before the cause of the shut down has been investigated.

The pump house is fitted with an external thermostat linked to a tubular heater and the motor contactor. This ensures that when the outside temperature drops near freezing the pump is shut down and the heater comes on to prevent the pump house freezing.

(Submersible Dirty Water Packs)

Single phase systems using a 1.5kw 240v single phase pump will give a nominal output of 4m3 per hour, over an area of 1017m2, giving an application of 3.3mm per hour.

 Three phase systems using a 3.7kw 415v three phase pump will give a nominal output of 6m3 per hour, over an area of 1194m2, giving an application of 4.3mm per hour

Three phase systems are extendable to 300m, subject to restrictions caused by static head.

Dirty Water Pack options:

 

(Slurry Pumps) 

(Multicam Irrigator)

 

 

 

 

(Slurry Mixers)

In addition to the Veneroni Slurry Pump range, Greencrop Irrigation also supplies Veneroni Slurry Mixers, including models in the following ranges:

 

Slurry Mixers (MB range)

The Mixer type "MB" is designed for sewage mixed with manure, and may be introduced via 70x70 cm manholes.

It is supplied hot galvanized. 

 

 

Slurry Mixers (M range)

The machine has been designed to treat sewage mixed with manure. As compared to other types of mixer with the same power inputs, this machine achieves notable time savings and is also able to homogenise sewage containing great quantities of solid manure, surface crusts and settled layers.

On request, the aerator-oxygenator may also be mounted to let air into the liquid mass. This increases the fertilizing capacity of the sewage and thus encourages fermentation, inhibiting the formation of odours. Thus treated, the sewage is ready to be pumped or directly intaken by the tank truck.

 The MD mixer is the electric version of the M series.

The propeller is operated by three-phase electric motors 380/660 4 poles B5, with industrial-type axial reduction gear. The transmission is in an oil bath with mechanical Widia seal.

The frame structure, which is composed of tubular elements, can be hot galvanized or in stainless steel AISI 304. Vertical and horizontal regulations are simple, thanks to a ball-bearing fifth wheel and a hydraulic jack with manual pump.

 

 

Model		A m	B m	C m	Motor power		Treated liquid manure (m3/h)
					CV	kW
MD4/	5,5	2,8	4,2	2,3	7,5	5,5	160
	7,5				10	7,5	185
	11				15	11	235
MD5/	5,5	3,5	5,2	3	7,5	5,5	160
	7,5				10	7,5	185
	11				15	11	235
MD6/	7,5	4,2	6,2	3,7	10	7,5	185
	11				15	11	235
	15

 

 Slurry Mixers - MF Range

• Treatment of great quantities of sewage in short time
• Tractor operation at 500 rpm with double transmission at 90°
• High performance due to the particular shape of the blades
• Transmission in oil bath with ball bearing and mechanical Widia seal
• The mixer is attached to a column supported by a three point frame
• Regulation of the working depth by hydraulic jack
• Height of the column from 2 to 5.5 m according to the tank projection.
• Aeration-oxygenation system
• 360 degree column rotation

 

 

 

 

Model	L1 mm	H1 mm	H2 mm	H3 mm	Absorbed power (540/1') CV	Treated liquid manure (m3/h)
MF 2/5  MF 2/6  MF 2/7  MF 2/8	5200	2300	2000	3400	40÷80	300÷700
	6200			4000
	7200			4600
	8200			5200
MF 2,5/5  MF 2,5/6  MF 2,5/7  MF 2,5/8	5200	2800	2500	3400	40÷80	300÷700
	6200			4000
	7200			4600
	8200			5200
MF 3/6  MF 3/7  MF 3/8	6200	3300	3000	4000	40÷80	300÷700
	7200			4600
	8200			5200
MF 3,5/6  MF 3,5/7  MF 3,5/8	6200	3800	3500	4000	40÷80	300÷700
	7200			4600
	8200			5200
MF 4/7  MF 4/8	7200	4300	4000	4600	40÷80	300÷700
	8200			5200
MF 4,5/7  MF 4,5/8	7200	4800	4500	4600	40÷80	300÷700
	8200			5200
MF 5/8	8200	5300	5000	5200	40÷80	300÷700
MF 5,5/8	8200	5800	5500	5200	40÷80	300÷700

(Bunded Fuel High Speed Bowser) 

Greencrop can now offer a High speed Bunded fuel (diesel) bowser for highway use. The high-speed tow version GCFB 220 and GCFB 220T (tandem axle) have a capacity of 1,000 litres (220 gallon), which has been tested by the Ministry of Transport and is fully compliant to ADR - IBC - UN Approval and is supplied with certified documentation.

ADR Diesel Bowsers have to comply with recently introduced Carriage of Dangerous Goods by Road Regulations. Under these regulations diesel is now classified as a dangerous substance due to its potential flammability, especially when in a vapour state. In order to do so safely, the transportation on the road must be done in containers which comply with the requirements of the ADR regulations. ADR regulations are a European agreement. The inner tank must be able to be fully removed form the outer bund tank for inspection if required after every 30 months.

The Greencrop Bowser consists of IBC containers (intermediate bulk container), which are mounted on a towable chassis with a layer of rubber between the outer tank and chassis. The IBC's can only be retained on a chassis or frame and must not have the chassis or frame form part of their structure.

The containers are classified as IBC's to UN31A coding. To achieve this they had to be independently tested to withstand test pressures and drop testing, (the Greencrop tank so far gave the best results with regards to the least distortion on the tests) The container is also required to feature a specialised pressure relief and explosion valve, inspection hatch and a max fill indicator.

(Slurry Separators)

Re-using slurry offers enormous advantages in terms of transportation, storage, cleanliness and energy saving. Separating the solids in slurry from the liquid is the answer to the urgent problem of nitrates. Specially formulated, SEPCOM ® is simple, reliable, efficient and economical. Liquid Phase Easy to spread, mix, and pump Minimum residual sedimentation or incrustation Can be used for washing out sheds Excellent for ferti-irrigation  Solid Phase Shovelable, easy to store and convey Can be used as bedding for Animals Excellent as soil ammendant The odourless, non-percolating product can be marketed

 

Compliance with recent norms and legislation on agronomic use of animal farming effluents in Europe and many other ecology aware countries will bring changes in farm management.

Where production of effluents is higher than the admissible load on the soil, this creates problems such as larger manure storage tanks requirements, and larger areas for manure distribution with longer distances to cover. All this implies higher costs, and such problems will arise more and more frequently.

It is therefore useful to take a new management approach that favours reduction of both transport and new distribution areas and addresses the fertilizing power of the farming effluent after separation.

Working with the Department of Rural Economic & Engineering of the University of Bologna, WAMGROUP® has analysed the problem of how to manage animal farming effluents in-depth, from both an economic and an environmental point of view, and evaluated the convenience of using a screw-type solids-liquid separator - an innovative aspect introduced by WAMGROUP® into product and process design, along with the manufacture machine components from engineering polymer SINT®.

 

First results in laboratory and field tests showed considerable advantages over competitors, mainly due to the polymer screw. The separating effect produces agronomic and management benefits. Looking at the two phases the following becomes evident: 

• as less energy is required to distribute the separated liquid on fields, the problem of smearing over crops is greatly reduced
• the separated liquid is more suitable for fertilization through irrigation with reduced addition of chemical fertilizers and lower costs
• the distribution period is also extended, thus reducing storage volumes
• the solid separated can be used in pre-ploughing and possibly destined to the fields most distant from the farm, generating lower costs and quicker delivery than common manure
• the separated phase can be sold to other farmers or growers who require organic fertilizer
• research results in some of the farms monitored have shown savings in effluent management ranging between €0.30 and 1.00  per cubic metre, in relation to the distance to cover and to the final destination of the separated solid.